Search
For mounting abrasive sanding sleeves. Sleeves are secured in place by controlled expansion of solid rubber drum spindle. Rubber expansion is controlled by tightening/loosening of the hex nut. The rubber spindles is seated directly on the drive mandrel/arbor. Rubber provides cushion for smooth, even finish.

View Catalog Page
1 - 25 of 54 | Results Per Page | View | Unit of Measure
1 2 3 

Item #

Shank Dia.

Drum Dia.

Drum Width 

CAD

N/A 1/8 in N/A 3/8 in N/A 1/2 in N/A CAD
N/A 1/8 in N/A 1/2 in N/A 1/2 in N/A CAD
N/A 1/8 in N/A 1/2 in N/A 3/4 in N/A CAD
N/A 1/8 in N/A 3/4 in N/A 1/2 in N/A CAD
N/A 1/8 in N/A 3/4 in N/A 3/4 in N/A CAD
N/A 1/4 in N/A 1/2 in N/A 1/2 in N/A CAD
N/A 1/4 in N/A 1/2 in N/A 3/4 in N/A CAD
N/A 1/4 in N/A 1/2 in N/A 1 in N/A CAD
N/A 1/4 in N/A 1/2 in N/A 1 1/2 in N/A CAD
N/A 1/4 in N/A 1/2 in N/A 2 in N/A CAD
N/A 1/4 in N/A 1/2 in N/A 3 in N/A CAD
N/A 1/4 in N/A 1/2 in N/A 1/2 in N/A CAD
N/A 1/4 in N/A 1/2 in N/A 1 in N/A CAD
N/A 1/4 in N/A 1/2 in N/A 1 1/2 in N/A CAD
N/A 1/4 in N/A 1/2 in N/A 2 in N/A CAD
N/A 1/4 in N/A 1/2 in N/A 3 in N/A CAD
N/A 1/4 in N/A 1 in N/A 1/2 in N/A CAD
N/A 1/4 in N/A 3/4 in N/A 3/4 in N/A CAD
N/A 1/4 in N/A 3/4 in N/A 1 in N/A CAD
N/A 1/4 in N/A 3/4 in N/A 1 1/2 in N/A CAD
N/A 1/4 in N/A 3/4 in N/A 2 in N/A CAD
N/A 1/4 in N/A 3/4 in N/A 3 in N/A CAD
N/A 1/4 in N/A 1 in N/A 1/2 in N/A CAD
N/A 1/4 in N/A 1 in N/A 3/4 in N/A CAD
N/A 1/4 in N/A 1 in N/A 1 in N/A CAD
1 - 25 of 54 | Results Per Page | View | Unit of Measure
1 2 3 
Terms & Conditions   |   Sitemap   |   Catalog IndexCopyright © 2018 Climax Metal Products Company. All rights reserved.
^