• Ball Bearing, Die-Cast Housing, Rigid Type PBDC-BL - Series

    • Ideal for applications requiring strong load support in limited mounting areas
    • Solid zinc die cast housing is non-corrosive & lightweight
    • Housing retains bearing securely by pressing the lip 360° over the outer race
    • Ball bearing is pre-lubricated & made to ABEC-1 tolerances
    • Wide inner race locks securely to the shaft with two set screws
    • Neoprene seal keeps contaminants out allowing for usage in wet or dry conditions
    • Operating Temperature Range: -30° F to 200° F
  • Ball Bearing, Pressed Steel Housing, Self-Aligning, Standard Type PBPS-BL - Series

    • Two-piece steel housing has a rust-proof plated finish
    • Bearing inserts are encased in non-conductive, oil resistant rubber liner which corrects up to a 2° misalignment while reducing vibration & noise
    • Ball bearing is pre-lubricated & made to ABEC-1 tolerances
    • Wide inner race locks securely to the shaft with two set screws
    • Neoprene seal keeps contaminants out allowing for usage in wet or dry conditions
    • Operating Temperature Range: -30° F to 200° F


    View Catalog Page

  • Ball Bearing, Pressed Steel Housing, Self-Aligning, Heavy Gauge Type PBPH-BL - Series

    • Heavy gauge pressed steel two-piece housing is crimped together at the bolt holes & has a rust-proof plated finish
    • Bearing inserts are encased in an extra thick, non-conductive oil resistant rubber liner which corrects up to a 2° misalignment while reducing vibration & noise
    • Ball bearing is pre-lubricated & made to ABEC-1 tolerances
    • Wide inner race locks securely to the shaft with two set screws
    • Neoprene seal keeps contaminants out allowing for usage in wet or dry conditions
    • Operating Temperature Range: -30° F to 200° F


    View Catalog Page

  • Bronze Bearing, Die-Cast Housing, Rigid Type PBDC-BR - Series

    • Zinc die-cast housing is non-corrosive & lightweight
    • Porous bronze sleeve bearings are press-fit in the solid zinc die-cast housing with an oil hole for lubrication
    • Sleeve bearings do not have moving parts & assure a low friction, smooth motion between two solid surfaces
    • Operating Temperature Range: -5° F to 220° F


    View Catalog Page

  • Bronze Bearing, Pressed Steel Housing, Self-Aligning, Standard Type PBPS-BR - Series

    • Two-piece pressed steel housing has a rust-proof plated finish
    • Bearing design allows for a vertical or horizontal mount as the spring lid oil cap can be positioned 4 different ways
    • Porous flanged bronze bearing is press-fit in the sturdy zinc die-cast sphere with a felt strip for lubrication
    • Bearing units include two replaceable rubber grommets that reduce noise & vibration
    • Operating Temperature Range: -5° F to 220° F


    View Catalog Page

  • UHMW-PE Bearing, Solid-Rigid Type PBUH-UH - Series

    • Ideal for wash down applications in wet or harsh environments or where sanitary conditions are a factor
    • Entire bearing unit is UHMW-PE
    • UHMW-PE Bearings are USDA & FDA approved
    • Self-lubricating bearings resist corrosion, high impact & abrasion
    • UHMW-PE units are interchangeable with most metal units
    • Operating Temperature Range: -60° F to 180° F


    View Catalog Page

  • UHMW-PE Bearing, Pressed Stainless Steel Housing, Self-Aligning Type PBSS-UH - Series

    • Ideal for wash down applications in wet or harsh environments or where sanitary conditions are a factor
    • Two-piece stainless steel housing
    • PBSS-UH Series bearings are USDA & FDA approved
    • UHMW-PE bearings are self-lubricating, resist corrosion, high impact & abrasion
    • Operating Temperature Range: -60° F to 180° F


    View Catalog Page

^