Tapered threaded mandrels for use with abrasive cone points. Sharp spiral threads are formed to provide a "self-locking" feature for the cones.
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 

Item #

Shank Dia.

O.A.L.

Taper Angle 

Taper Length 

Major Dia. 

CAD

CPM-1 N/A 1/4 in N/A 2.750 in N/A 12.00 º N/A 1 3/8 in N/A 3/8 in N/A CAD
CPM-2 N/A 1/4 in N/A 3.063 in N/A 6.00 º N/A 1 1/2 in N/A 1/4 in N/A CAD
CPM-3 N/A 1/4 in N/A 3.9375 in N/A 6.00 º N/A 2.5 in N/A 3/8 in N/A CAD
CPM-4 N/A 1/4 in N/A 4.438 in N/A 5.00 º N/A 3 in N/A 3/8 in N/A CAD
CPM-5 N/A 1/4 in N/A 3.125 in N/A 15.00 º N/A 1 7/8 in N/A 9/16 in N/A CAD
CPM-6 N/A 1/4 in N/A 3.313 in N/A 18.00 º N/A 1 7/8 in N/A 11/16 in N/A CAD
CPM-7 N/A 1/4 in N/A 3.313 in N/A 22.00 º N/A 1 9/16 in N/A 3/4 in N/A CAD
CPM-8 N/A 1/4 in N/A 3.375 in N/A 30.00 º N/A 1 7/8 in N/A 1 in N/A CAD
CPM-9 N/A 1/4 in N/A 4.250 in N/A 12.00 º N/A 2 9/16 in N/A 5/8 in N/A CAD
CPM-11 N/A 1/8 in N/A 2.750 in N/A 6.00 º N/A 1 in N/A 3/16 in N/A CAD
1 - 10 of 10 | Results Per Page | View | Unit of Measure
1 
linkedin

Copyright © 2016 Climax Metal Products Company. All rights reserved. | Terms of Use