Single-taper, self-centering design with mounting flange for use in through-bored components. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 260 mm |
d |
N/A 10.236 in |
D |
N/A 12.795 in |
D1 |
N/A 13.150 in |
L |
N/A 1.969 in |
L1 |
N/A 2.244 in |
L2 |
N/A 2.874 in |
L3 |
N/A 3.504 in |
Mt |
N/A 80,904 ft-lbs |
Fax |
N/A 189,688 lbs.F |
Ps |
N/A 24,971 psi |
Ph |
N/A 19977 psi |
| DN1 | N/A 20.618 in |
Locking Screws Quantity |
N/A 18 |
Locking Screws Size |
N/A M16 x 45 |
Ma-Locking Screws |
N/A 262 ft-lbs |
Hub Machining Tolerance |
N/A 0.004 in |
Shaft Machining Tolerance |
N/A -0.003 in |
Weight |
N/A 36.00 lb |
UPC Code |
N/A 044861058374 |
Downloads |
N/A
Catalog Page Installation & Removal Instructions Installation Demonstration (Video) Keyless Locking Technical Information |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Information.
