Ball Bearing, Die-Cast Housing, Rigid Type PBDC-BL - Series
Pillow Block Bearings
- Ideal for applications requiring strong load support in limited mounting areas
- Solid zinc die cast housing is non-corrosive & lightweight
- Housing retains bearing securely by pressing the lip 360° over the outer race
- Ball bearing is pre-lubricated & made to ABEC-1 tolerances
- Wide inner race locks securely to the shaft with two set screws
- Neoprene seal keeps contaminants out allowing for usage in wet or dry conditions
- Operating Temperature Range: -30° F to 200° F
Item # |
Bore Size |
A |
B |
C |
D |
E |
F |
G |
CAD |
|---|---|---|---|---|---|---|---|---|---|
| PBDC-BL-050 | Bore Size N/A 1/2 in | A N/A 1 1/8 in | B N/A 2 5/16 in | C N/A 4 1/4 in | D N/A 3 3/8 in | E N/A 3/8 in | F N/A 7/16 in | G N/A 1 5/16 in |
CAD
N/A 
|
| PBDC-BL-062 | Bore Size N/A 5/8 in | A N/A 1 1/8 in | B N/A 2 5/16 in | C N/A 4 1/4 in | D N/A 3 3/8 in | E N/A 3/8 in | F N/A 7/16 in | G N/A 1 5/16 in |
CAD
N/A
|
| PBDC-BL-075 | Bore Size N/A 3/4 in | A N/A 1 1/8 in | B N/A 2 5/16 in | C N/A 4 1/4 in | D N/A 3 3/8 in | E N/A 3/8 in | F N/A 7/16 in | G N/A 1 5/16 in |
CAD
N/A
|
| PBDC-BL-100 | Bore Size N/A 1 in | A N/A 1 1/4 in | B N/A 2 1/2 in | C N/A 4 5/8 in | D N/A 3 5/8 in | E N/A 3/8 in | F N/A 1/2 in | G N/A 1 3/8 in |
CAD
N/A
|
