- Two-piece steel housing has a rust-proof plated finish
- Bearing inserts are encased in non-conductive, oil resistant rubber liner which corrects up to a 2° misalignment while reducing vibration & noise
- Ball bearing is pre-lubricated & made to ABEC-1 tolerances
- Wide inner race locks securely to the shaft with two set screws
- Neoprene seal keeps contaminants out allowing for usage in wet or dry conditions
- Operating Temperature Range: -30° F to 200° F
View Catalog Page
Unit of Measure
Specifications
Bore Size |
N/A 3/4 in |
Bore Tolerance |
N/A +0.0005 / +0.001 in |
Bearing Style |
N/A Pillow Block |
Bearing Type |
N/A Ball |
Shaft Locking Method |
N/A 2 Set Screws |
Housing Material |
N/A Pressed Steel |
Insert Material |
N/A SAE 52100 |
Seal Material |
N/A Buna-N |
Lubricant |
N/A Chevron SRI #2, 35% fill |
Tolerance Class |
N/A ABEC-1 |
Maximum Speed Based on Light Load |
N/A 4500 RPM |
Static Load Capacity |
N/A 2877 lb |
Dynamic Load Capacity |
N/A 1479 lb |
Mounting Bolts Required |
N/A 2 |
Ambient Operating Temperature Range |
N/A -30 to 200 ºF |
Approximate Weight |
N/A 0.60 lb |
UPC Code |
N/A 044861015988 |
Downloads |
N/A
Catalog Page Bearing Tolerance |