Wide, medium taper, self-centering design for use in through-bored components with high torque and/or bending requirements. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 540 mm |
d |
N/A 21.260 in |
D |
N/A 25.000 in |
L |
N/A 5.512 in |
L1 |
N/A 6.299 in |
L2 |
N/A 7.165 in |
Mt |
N/A 773,080 ft-lbs |
Fax |
N/A 872,722 lbs.F |
Ps |
N/A 23048 psi |
Ph |
N/A 19600 psi |
| DN1 | N/A 39.869 in |
Locking Screws Quantity |
N/A 28 |
Locking Screws Size |
N/A M22 x 130 |
Ma-Locking Screws |
N/A 686 ft-lbs |
Hub Machining Tolerance |
N/A 0.004 in |
Shaft Machining Tolerance |
N/A -0.004 in |
Weight |
N/A 216.00 lb |
UPC Code |
N/A 044861047675 |
Downloads |
N/A
Catalog Page Installation & Removal Instructions Installation Demonstration (Video) Keyless Locking Technical Information |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
