Double-taper, non-self-centering design for use in counter-bored components. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 30 mm |
d |
N/A 1.181 in |
D |
N/A 2.165 in |
L |
N/A 0.669 in |
L1 |
N/A 0.787 in |
L2 |
N/A 1.024 in |
Mt |
N/A 439 ft-lbs |
Fax |
N/A 8,919 lbs.F |
Ps |
N/A 29928 psi |
Ph |
N/A 16324 psi |
| DN1 | N/A 3.167 in |
Locking Screws Quantity |
N/A 10 |
Locking Screws Size |
N/A M6 x 18 |
Ma-Locking Screws |
N/A 10 ft-lbs |
dB-Locking Screws |
N/A M8 |
Hub Machining Tolerance |
N/A 0.003 in |
Shaft Machining Tolerance |
N/A -0.002 in |
Weight |
N/A 0.60 lb |
UPC Code |
N/A 044861075869 |
Downloads |
N/A
Catalog Page Installation & Removal Instructions Installation Demonstration (Video) Keyless Locking Technical Information |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Information.
