Double-taper, non-self-centering design for use in counter-bored components. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 110 mm |
d |
N/A 4.331 in |
D |
N/A 6.102 in |
L |
N/A 1.024 in |
L1 |
N/A 1.299 in |
L2 |
N/A 1.772 in |
Mt |
N/A 9,656 ft-lbs |
Fax |
N/A 53,513 lbs.F |
Ps |
N/A 32020 psi |
Ph |
N/A 22724 psi |
| DN1 | N/A 10.640 in |
Locking Screws Quantity |
N/A 14 |
Locking Screws Size |
N/A M12 x 30 |
Ma-Locking Screws |
N/A 89 ft-lbs |
dB-Locking Screws |
N/A M14 |
Hub Machining Tolerance |
N/A 0.004 in |
Shaft Machining Tolerance |
N/A -0.003 in |
Weight |
N/A 5.10 lb |
UPC Code |
N/A 044861086742 |
Downloads |
N/A
Catalog Page Installation & Removal Instructions Installation Demonstration (Video) Keyless Locking Technical Information |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Information.
