Single-taper, self-centering design with mounting flange for use in through-bored components with smaller pitch/outside diameters. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 75 mm |
d |
N/A 2.953 in |
D |
N/A 3.740 in |
D1 |
N/A 4.685 in |
D2 |
N/A 4.961 in |
L |
N/A 2.559 in |
L1 |
N/A 3.386 in |
L2 |
N/A 3.780 in |
L3 |
N/A 4.173 in |
Mt |
N/A 4,208 ft-lbs |
Fax |
N/A 34,204 lbs.F |
Ps |
N/A 12,007 psi |
Ph |
N/A 9479 psi |
| DN1 | N/A 4.632 in |
Locking Screws Quantity |
N/A 9 |
Locking Screws Size |
N/A M10 x 25 |
Ma-Locking Screws |
N/A 61 ft-lbs |
Hub Machining Tolerance |
N/A 0.003 in |
Shaft Machining Tolerance |
N/A -0.003 in |
Weight |
N/A 7.30 lb |
UPC Code |
N/A 044861077856 |
Downloads |
N/A
Catalog Page Installation & Removal Instructions Installation Demonstration (Video) Keyless Locking Technical Information |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi. For details see Hub Strength in Technical Information.
