Single-taper, self-centering design with mounting flange for use in through-bored components. Mounted component remains fixed axially during installation.
View Catalog Page
View Catalog Page
Unit of Measure
Specifications
Shaft Size |
N/A 1 3/16 in |
d |
N/A 1.188 in |
D |
N/A 2.165 in |
D1 |
N/A 2.421 in |
L |
N/A 0.669 in |
L1 |
N/A 0.886 in |
L2 |
N/A 1.122 in |
L3 |
N/A 1.358 in |
Mt |
N/A 190 ft-lbs |
Fax |
N/A 3,840 lbs.F |
Ps |
N/A 6,329 psi |
Ph |
N/A 3481 psi |
| DN1 | N/A 2.434 in |
Locking Screws Quantity |
N/A 6 |
Locking Screws Size |
N/A M6 x 20 |
Ma-Locking Screws |
N/A 9 ft-lbs |
Hub Machining Tolerance |
N/A 0.002 in |
Shaft Machining Tolerance |
N/A -0.002 in |
Weight |
N/A 0.70 lb |
UPC Code |
N/A 044861081709 |
Downloads |
N/A
Installation & Removal Instructions Installation Demonstration (Video) Keyless Locking Technical Information |
- 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Information.
