Item # F4DC-BL-100, Ball Bearing, Die-Cast Housing, Rigid Type (4 Bolt) F4DC-BL

Request Information

Ideal for applications requiring strong load support in limited mounting areas
Solid zinc die-cast housing is non-corrosive & lightweight
Housing retains bearing securely by pressing the lip 360° over the outer race
Ball bearing is pre-lubricated & made to ABEC-1 tolerances
Wide inner race locks securely to the shaft with two set screws
Neoprene seal keeps contaminants out allowing for usage in wet or dry conditions
Operating Temperature Range: -30° F to 200° F

Unit of Measure

Drawing | Specifications | Dimensions | Regulation & Compliance

Dimensional Drawing

N/A

Ball Bearing, Die-Cast Housing, Rigid Type (4 Bolt) F4DC-BL - Series

Bore Size	N/A 1 in
Bore Tolerance	N/A +0.0005 / +0.001 in
Bearing Style	N/A Flange Mount
Bearing Type	N/A Ball
Shaft Locking Method	N/A 2 Set Screws
Housing Material	N/A Die-Cast Zinc
Insert Material	N/A SAE 52100
Seal Material	N/A Buna-N
Lubricant	N/A Chevron SRI #2, 35% fill
Tolerance Class	N/A ABEC-1
Maximum Speed Based on Light Load	N/A 3500 RPM
Static Load Capacity	N/A 3153 lb
Dynamic Load Capacity	N/A 1768 lb
Mounting Bolts Required	N/A 4
Ambient Operating Temperature Range	N/A -30 to 200 ºF
Approximate Weight	N/A 1.20 lb
UPC Code	N/A 044861008386
Downloads	N/A Catalog Page Bearing Tolerance

A - Overall Length	N/A 3 3/4 in
B - Bearing Seat Outer Diameter	N/A 2 3/8 in
C - Bolt Hole Center-to-Center	N/A 2 3/4 in
D - Mounting Bolt Hole Size	N/A 7/16 in
E - Mounting Base Height	N/A 7/16 in
F - Overall Height	N/A 1 1/4 in