Ball Bearing, Pressed Steel Housing, Self-Aligning, Heavy Gauge Type PBPH-BL

Heavy gauge pressed steel two-piece housing is crimped together at the bolt holes & has a rust-proof plated finish
Bearing inserts are encased in an extra thick, non-conductive oil resistant rubber liner which corrects up to a 2° misalignment while reducing vibration & noise
Ball bearing is pre-lubricated & made to ABEC-1 tolerances
Wide inner race locks securely to the shaft with two set screws
Neoprene seal keeps contaminants out allowing for usage in wet or dry conditions
Operating Temperature Range: -30° F to 200° F

Item #	Bore Size	A	B	C	D	E	F	G	CAD
PBPH-BL-050	N/A 1/2 in	N/A 1 5/16 in	N/A 2 5/8 in	N/A 4 7/16 in	N/A 3 7/16 in	N/A 7/16 in	N/A 9/64 in	N/A 1 11/16 in	N/A
PBPH-BL-062	N/A 5/8 in	N/A 1 5/16 in	N/A 2 5/8 in	N/A 4 7/16 in	N/A 3 7/16 in	N/A 7/16 in	N/A 9/64 in	N/A 1 11/16 in	N/A
PBPH-BL-075	N/A 3/4 in	N/A 1 5/16 in	N/A 2 5/8 in	N/A 4 7/16 in	N/A 3 7/16 in	N/A 7/16 in	N/A 9/64 in	N/A 1 11/16 in	N/A
PBPH-BL-100	N/A 1 in	N/A 1 1/2 in	N/A 2 7/8 in	N/A 5 3/16 in	N/A 4 in	N/A 1/2 in	N/A 9/64 in	N/A 1 7/8 in	N/A