Climax Metal Products Company
Climax Metal Products Company
Mailing Address:
8141 Tyler Boulevard
Mentor, Ohio 44060
USA
Phone: 440-585-0300
Fax: 800-860-5553
E-Mail: sales@climaxmetal.com
Website: https://climaxmetal.wpengine.com/
Print Back
Single-taper, self-centering design without mounting flange for use in through-bored components. Mounted component moves axially during installation.

View Catalog Page
Installation & Removal Instructions
Locking Assembly Series C123 / Metric Locking Assembly Series C123
Locking Assembly
Unit of Measure
Items Locking Assembly Series C123 / Metric Locking Assembly Series C123
C123E-075
Series C123 Locking Assembly 		Locking Assembly Series C123 / Metric Locking Assembly Series C123
C123E-087
Series C123 Locking Assembly 		Locking Assembly Series C123 / Metric Locking Assembly Series C123
C123E-100
Series C123 Locking Assembly
Calculator N/A Climax Hub OD Calculator
N/A Climax Hub OD Calculator
N/A Climax Hub OD Calculator
Dimensional Drawing N/A
Locking Assembly
 		N/A
Locking Assembly
 		N/A
Locking Assembly
Shaft Size N/A 3/4 in N/A 7/8 in N/A 1 in
d N/A 0.750 in N/A 0.875 in N/A 1.000 in
D N/A 1.850 in N/A 1.850 in N/A 1.969 in
L N/A 0.669 in N/A 0.669 in N/A 0.669 in
L1 N/A 0.886 in N/A 0.886 in N/A 0.886 in
L2 N/A 1.122 in N/A 1.122 in N/A 1.122 in
L3 N/A 1.358 in N/A 1.358 in N/A 1.358 in
Mt N/A 259 ft-lbs N/A 302 ft-lbs N/A 414 ft-lbs
Fax N/A 8282 lbs.F N/A 8282 lbs.F N/A 9938 lbs.F
Ps N/A 43765 psi N/A 37513 psi N/A 39388 psi
Ph N/A 17739 psi N/A 17739 psi N/A 20009 psi
DN1 N/A 2.807 in N/A 2.807 in N/A 3.175 in
Locking Screws Quantity N/A 5 N/A 5 N/A 6
Locking Screws Size N/A M6 x 20 N/A M6 x 20 N/A M6 x 20
Ma-Locking Screws N/A 10 ft-lbs N/A 10 ft-lbs N/A 10 ft-lbs
Hub Machining Tolerance N/A 0.002 in N/A 0.002 in N/A 0.002 in
Shaft Machining Tolerance N/A -0.002 in N/A -0.002 in N/A -0.002 in
Weight N/A 0.60 lb N/A 0.60 lb N/A 0.70 lb
UPC Code N/A 044861074008 N/A 044861074022 N/A 044861074053
  • 1 Minimum hub outside diameter based on a Pressure reduction Factor of C=1.0 and hub material with tensile yield point = 45,000 psi for carbon steel and a tensile yield point = 30,000 psi for stainless steel. For details see Hub Strength in Technical Information.